DAFA WindFoil 130 wind barrier

DAFA WindFoil 130 wind barrier is a 3.05 m wide strong, 3-layer vapor-permeable membrane used in lightweight outer wall structures.

DAFA WindFoil 130 wind barrier
DAFA WindFoil 130 wind barrier

DAFA WindFoil 130 wind barrier

DAFA WindFoil 130 is used as a wind barrier in ventilated, lightweight outer wall cladding. With a width of 3.05 meters, it is now possible to install the wind barrier at full wall height without having to tape an overlap. This ensures an airtight wind barrier and rapid, time-saving installation. DAFA WindFoil 130 may only be used behind cladding that prevents UV light penetration.

Material

DAFA WindFoil 130 is made of 3-layer foil with high tear strength and a waterproof special coating with UV and IR stabilizers that inhibit aging. DAFA WindFoil 130 has dotted lines on both sides marking 150 mm of overlap. The membrane is vapor-permeable with an Sd value of approx. 0.02 m. The Sd value must be multiplied by a factor of approx. 5.7 to obtain the Z value.

Advantages

  • DAFA WindFoil 130 is a declared product in the Supply Chain Declaration Portal for New Construction Generation 4
  • 3.05 m wide
  • Has dotted lines on both sides marking 150 mm of overlap
  • Rapid and time-saving installation
  • High tensile and tear strength
DAFA WindFoil 130 wind barrier
DAFA WindFoil 130 wind barrier
DAFA WindFoil 130 wind barrier